loading

More than twenty years experience in screw air compressor manufacturing.  

Compressed Air Dryer by Greeknhi Screw Air Compressor 1
Compressed Air Dryer by Greeknhi Screw Air Compressor 2
Compressed Air Dryer by Greeknhi Screw Air Compressor 3
Compressed Air Dryer by Greeknhi Screw Air Compressor 4
Compressed Air Dryer by Greeknhi Screw Air Compressor 5
Compressed Air Dryer by Greeknhi Screw Air Compressor 1
Compressed Air Dryer by Greeknhi Screw Air Compressor 2
Compressed Air Dryer by Greeknhi Screw Air Compressor 3
Compressed Air Dryer by Greeknhi Screw Air Compressor 4
Compressed Air Dryer by Greeknhi Screw Air Compressor 5

Compressed Air Dryer by Greeknhi Screw Air Compressor

Model:
GA75+
Motor power:
75KW/100HP
Delivery time:
20days
Start Port:
Xiamen port,China
Working pressure: :
8/10/13BAR
Inquiry

Product details of the compressed air dryer


Product Information

Xin Green Machinery (Fujian) Co., Ltd put lots of time and energy even on outline of compressed air dryer. The optimum quality and excellent performance makes the product the most sought-after product. Xin Green Machinery (Fujian) Co., Ltd is dedicated to making continuous customer service improvement a priority.

Greekn H.I. SCREW AIR COMPRESSOR

GA+ Series Two Stage Fixed Speed Rotary Screw Air Compressor

MOQ: 1SET

Payment: T.T

Delivery time: 10-30 days

Start Port: Xiamen port,China.

Certification: CE GCCA

Packing: Paper box

Model: GA22+-GA355+

 Motor power: 30-485HP

 Motor power: 22-355kW

Motor type: High efficiency motor

 Working pressure: 7-13BAR

Capacity: 3.2-69.2m³/min

Voltage: 220/380/415/440/460V

 Frequency: 50/60HZ

Air end: Two stage

Energy saving air end

The two stage air end can produce more air when compared with the single stage one with the same power. The two stage air end combines a single stage and two stage compressor rotor into an enclosure with a direct drive front gear in order to achieve an optimum linear velocity that matches the air output during each stage's rotor operation.

Subsided air inlet valve

For Greekn H.I. GA+ series compressor, a gravity-inducted back-pressure valve is used as the air inlet valve, which prevents oil blowout from the air end and reduces air intake resistance.

High polymer filter paper

The Greekn H.I. GA+ series lubrication system is designed with a highly efficient oil-gas separator filter element, which can remove oil impurities, lower compressor wear and ensure a long lifespan up to 4000-8000 hours.

Intelligent control

The Greekn H.I. GA+ series comes with a RS485 communication interface, through which computer remote communication control and simultaneous control of several compressors is achieved.

Soft starter

With this soft starter, the instantaneous current generated as the motor starts is significantly lowered, thus protecting the motor and other compressor parts, ensuring there is less load and wear on the compressor.

Four-pole motor

As the motor speed is relatively low with 1480RPM (50HZ) as compared with that of the two-pole motor, there is air compressor wear and a longer service life.

Side-mounted cooler

It is a highly efficient cooling system designed specially for clients in tropical areas to keep them away from compressor shutdown difficulties caused by high temperature operation of the machine.

Company introduction

The Greekn H.I. company covers a construction area of 25,000 square meters, the factory covers an area of 15,000 square meters, more than 100 employees, including more than 60 workshop technicians, 10 R & D engineers, more than 20 sales team.Our specialization lies in screw air compressor technology. We are fully committed to providing customers with highly effective air compressors and dryers to help customers achieve optimal performance in even the most challenging conditions, like tropical areas with high-temperature operation. Our products help lower the consumption of electrical energy without sacrificing performance.

company1 (2)

Product Details

13 (2)

Energy saving double stage air end

The two stage air end can produce more air when compared with the single stage one with the same power. The two stage air end combines a single stage and two stage compressor rotor into an enclosure with a direct drive front gear in order to achieve an optimum linear velocity that matches the air output during each stage's rotor operation.

High efficiency four-pole induction motor

As the motor speed is relatively low with 1480RPM (50HZ) as compared with that of the two-pole motor, there is air compressor wear and a longer service life.

3 (4)
9 (2)

Thermostatic valve

Sense the temperature of oil by thermostatic valve,protect machine from over-heating.

Oil separate tank

Triple stages of separator can effectively reduce the oil content to less than 2ppm.

7 (2)
6 (2)

Patented design of inlet valve

Sinking gravity sensor oil stop valve,effectively stops the oil reverse and largely reduces the inlet obstruction loss.

Controller

Triple stages of separator can effectively reduce the oil content to less than 2ppm.

5 (2)
4 (2)

Oil separator

Multi-grade oil separator,the oil content of fine public 2ppm pollution minimum and required minimum maintenance.

Air filter

Triple stages of separator can effectively reduce the oil content to less than 2ppm.

2 (2)
10 (2)

Large cooler

Combined design of air cooler and oil cooler.A higher level standard makes the compressor run in ambient temperature 55 centigrade.

Centrifugal fan

An optional backward curved centrifugal fan uses an impeller to increase air flow.In addition,during the operation the centrifugal fan features no friction,low noise,no dust and easy maintenance.

11 (2)
12 (2)

Inverter

Energy saving 20%-30%

Highly-efficient PWM inverter:

Keep constant discharge pressure.

Lower the sudden current of launching.

Adjust the motor rotary speed to produce air according to the demand.

** The GAVSD series compressor can run in two mode,variable speed mode or fixed speed mode.

FAQ

The target market of our brand has been continuously developed over the years. For more information, please reach our team, we are more than happy to help.

1
What's your delivery time?
If we have the compressor on stock,it will take within one week.If we don't have the compressor on stock,it's depend on the quantity you ordered,but no more than 45days.
2
Can you provide customized service to us?
Sure, we can do OEM order.
3
What's your Payment item?
We can accept T/T, L/C, etc. 30% deposit before production, and 70% before shipment.
4
What's the warranty period for screw air compressors?
We supply one year warranty for the whole screw air compressor,two years for the air end and motor.
5
What's the MOQ of your air compressor?
Our minimum order quantity is one set,so you can place a trial order of one set air compressor.
6
What package do you use for this item?
We provide free carton boxes, but if you need customized package, please tell us in advance.
7
Are you a manufacturer of screw air compressor?
Yes,we are manufacturer of screw air compressor with more than twenty years experience in China.We also manufactures all kinds of air receiver tanks.
8
How to choose air compressors?
A:There are two important parameters you need to pay attention to: 1.Pressure Which means the minimum pressure of compressed air, the commonly used units include Kg/cm2, Bar, Mpa, Psi. 2.Capacity Which refers to the maximum air consumption with the appropriate allowance considered and the often used units are m3/min and L/min.


Company Feature

• Greeknhi possesses advantageous geographical position transportation here is convenient for the direct buses and nearby subways.
• Greeknhi has been engaged in the machinery manufacturing for years. The machinery enjoys a certain reputation in the domestic market for reliable quality and reasonable price.
• Greeknhi insists on the principle to focus on customer and service. According to the customer's different needs, we provide relevant solutions and good user experiences.
We sincerely welcome people from all walks of life to come to make cooperation, common development and a better future.

Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
no data

Greeknhi is committed to the research and development,design, production,sales,installation, repair,maintenance and technical engineering consulting services of efficient and energy-saving air compression system and compressed air purification equipment.The main products of the company are screw air compressor,air dryer,air receiver tank,etc...

Contact us
Contact Person: Joanna Guo
Mob./WhatsApp: +8615659205772
E-mail: joanna@greeknhi.com
Address: No. 1021 West Yifeng Road,Quangang District,Quanzhou,China.
中国官网:www.greeknhi.com.cn 
Customer service
detect